Russound COMPOINT - Instruction Manual download pdf (Page 12)

12

USER SECTION

Operation

The module then activates for 3 seconds

and the keypad and door station confirm

activation with a buzz tone.

To activate the Door Strike Release Module

from an Advanced Keypad during a door

call, press and hold both the Previous and

Next keys at the same time for 3 seconds.

The module then activates for 3 seconds

and the keypad and door station sound a

buzz tone to confirm activation.

To activate the Door Strike Release Module

from an Advanced Keypad when there is

no current door call session, first press the

Previous or Next key to scroll through the

list to the door label (figure 11). Then press

and hold both keys for 3 seconds.

Listen mode

You can use your ComPoint system to con-

tinuously listen to any single zone from one

or more other zones. To do this, first turn

on a keypad microphone in the zone you

want to listen to, then select that zone on

one or more other keypads.

Other communication events have priority

over Listen mode but only temporarily

interrupt it.

To turn on a zone microphone, select that

zone on its own keypad. The Talk key lights

up red to indicate the keypad’s microphone

is active. On a Basic keypad, the zone key

blinks (figure 12) and on an Advanced

Keypad, the zone label changes to MicOn

after 2 seconds (figure 13).

Note:

Only one

zone microphone can be on at once.

Fig. 12. Basic Keypad Microphone On indication

Door1 Door1

Fig. 11. Releasing a door strike on the Advanced Keypad

12

Door strike release

(cont’d)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments