ELAN Home Systems | Lexington, KY USA | Technical Support: 800-622-3526 ELAN Home Systems Life Just Got Better Audio Integration NoteManufacturer: R
2 of 9 With ELAN software VERSION 3, any other source that is controlled by IR from the CAV6.6/CAM6.6 will appear in the Viewer interface represented
3 of 9 INSTALLATION OVERVIEW 1. During the rough-in phase, install speaker wire for the speakers and Cat5 cable for keypads, in each zone. 2. Also d
4 of 9 CONNECTION DIAGRAMS BILL OF MATERIALS # Device M anufacturer Part Number Protocol Connector Type Notes1 Speakers N/A Analog Wire2KeypadUno S
5 of 9 CAV6.6/CAM6.6 PROGRAMMING Once the equipment is installed and connected you must program the CAV6.6/CAM6.6 according to Russound guidelines. S
6 of 9 DETERMINING FIRMWARE VERSION OF THE CAV6.6 AND UNOS2 KEYPADS Step Instructions Comments 1 Change the RS-232 front/rear switch to the other p
7 of 9 4 Press MEM^ several times until VERSION appears in the display 5 Press BAND The version appears in the display
8 of 9 CONFIGURATION DETAILS The following table provides settings used in the ELAN Configurator when connecting to a CAV6.6/CAM6.6 system. Please re
9 of 9 COMMON MISTAKES 1. Forgetting to switch the RS-232 selector switch on the front of the CAV6.6/CAM6.6 to “Front / Rear”. 2. Improper programmi
Comments to this Manuals